CARBON MONOXIDE EXHAUST ANALYZER

and Optional Printer


 General DescriptionKey FeaturesApplications SpecificationsOrder Information


Carbon Monoxide AnalyzerGENERAL DESCRIPTION

Put the power of a gas analyzer in the palm of your hand with a CO Series or 2500 Exhaust Gas Analyzer from Blanke Industries. These portable analyzers use a revolutionary new electrochemical sensor that is smaller and more affordable than traditional chemical and infrared sensors. The analyzers are fast, accurate and easy to use.

The instruments are designed to check CO emissions from any internal combustion engine. They can be used on engines powered by gasoline, propane, natural gas and even diesel fuel. Monitoring exhaust emissions is not only important to help control pollutants, it also helps maintain optimum fuel efficiency and extend engine life. These tools will quickly determine the general health of an engine. With a CO Series 2500 Analyzer, any engine can be properly tested and repaired to assure ideal engine performance.


KEY FEATURES


APPLICATIONS


General Specifications

Forklift
Motorcycle
Floor Scrubber
Lawnmower
Car

 

Batteries Rechargeable NiCad
Typical battery life Over 12 hours of continuous use(1)(2)
Start-up time Instant “on”, no warm-up
Construction Rugged, fuel and oil resistant, ABS plastic
Sample flow rate Approximately 72 in³/min (1180 ml/min)
Operating temperature 35 to 104°F (2 to 40°C)
Storage temperature 10 to 122°F (-10 to 50°C)
Humidity range 10-90% RH (non-condensing)
User Calibration Monthly or as needed
CO:
Sensor type Electrochemical
Sensor life Typically 3-5 years
Range 0-10%
Resolution 0.01%
Response time Less than 10 seconds to 90% of full scale
Accuracy ±5% of reading (3)
Repeatability ±5% of reading (3)

Physical:

Dimensions 9.3” L × 5.2” W × 1.8” H
Weight 2.40 pounds (1.09 kg)
Display 3½ digit LCD, ¾” digit height, backlit
Probe(s) 12” flexible steel, ½” O.D.
& ¼” O.D.
Sample hose 10’ length × ¼” O.D.
2 stage filter 75 micron particle, 5 micron oil removal

ORDER INFORMATION

CO Series 2500

Includes CO analyzer, 10’ exhaust sample hose with flexible probe (½” O.D.), narrow flexible probe (¼” O.D.), water separator w/ 2 stage filter, replacement filters (1 set), 110 VAC adapter / chargers and protective storage case

2500 A CO Exhaust Analyzer
Shown with optional thermal printer (DP-414)

General Specifications

Optional Accessories